| IEC
61156-5:2002
Multicore and symmetrical pair/quad cables
for digital communications - Part 5: Symmetrical pair/quad cables
with transmission characteristics up to 600 MHz - Horizontal floor
wiring - Sectional specification
IEC 61156-5-1:2007
Multicore and symmetrical pair/quad cables
for digital communications - Part 5-1: Symmetrical pair/quad cables
with transmission characteristics up to 1000 MHz-Horizontal floor
wiring - Blank Detail specification
IEC 61156-6:2007
Multicore and symmetrical pair/quad cables
for digital communications - Part 6: Symmetrical pair/quad cables
with transmission characteristics up to 1 000 MHz - Work area wiring
- Sectional specification
IEC 61156-6-1:2007
Multicore and symmetrical pair/quad cables
for digital communications - Part 6-1: Symmetrical pair/quad cables
with transmission characteristics up to 1 000 MHz - Working area
wiring - Blank detail specification
|
|
EN
50288-2-1:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 2-1: Sectional specification
for screened cables characterised up to 100 MHz - Horizontal and
building backbone cables
EN 50288-2-2:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 2-2: Sectional specification
for screened cables characterised up to 100 MHz - Work area and
patch cord cables
EN 50288-3-1:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 3-1: Sectional specification
for unscreened cables characterised up to 100 MHz - Horizontal and
building backbone cables
EN 50288-3-2:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 3-2: Sectional specification
for unscreened cables characterised up to 100 MHz - Work area and
patch cord cables
EN 50288-4-1:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 4-1: Sectional specification
for screened cables characterised up to 600 MHz - Horizontal and
building backbone cables
EN 50288-4-2:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 4-2: Sectional specification
for screened cables characterised up to 600 MHz - Work
area and patch cord cables
EN 50288-5-1:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 5-1: Sectional specification
for screened cables characterised up to 250 MHz - Horizontal and
building backbone cables
EN
50288-5-2:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 5-2: Sectional specification
for screened cables characterised up to 250 MHz - Work
area and patch cord cables
EN
50288-6-1:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 6-1: Sectional specification
for unscreened cables characterised up to 250 MHz - Horizontal and
building backbone cables
EN
50288-6-2:2003
Multi-element metallic cables used in analogue
and digital communication and control - Part 6-2: Sectional specification
for unscreened cables characterised up to 250 MHz - Work
area and patch cord cables
EN
50117-4-1:2008
Coaxial cables - Part 4-1: Sectional specification for cables for
BCT cabling in accordance with EN 50173 - Indoor drop cables for
systems operating at 5 MHz - 3 000 MHz
|
|
BS
versions of those ENs listed |
IEC
60603-7-2:20073-7-2:2007
Connectors for electronic equipment - Part
7-2: Detail specification for 8-way, unshielded, free and fixed
connectors, for data transmissions with frequencies up to 100 MHz
IEC 60603-7-3:2008
Connectors for electronic equipment - Part
7-3: Detail specification for 8-way, shielded, free and fixed connectors,
for data transmissions with frequencies up to 100 MHz
IEC 60603-7-4:2005
Connectors for electronic equipment - Part
7-4: Detail specification for 8-way, unshielded, free and fixed
connectors, for data transmissions with frequencies up to 250 MHz
IEC 60603-7-5:2007
Connectors for electronic equipment - Part
7-5: Detail specification for 8-way, shielded, free and fixed connectors,
for data transmissions with frequencies up to 250 MHz
IEC
60603-7-7:2006
Connectors for electronic equipment - Part
7-7: Detail specification for 8-way, shielded, free and fixed connectors,
for data transmissions with frequencies up to 600 MHz
IEC 61076-3-104:2006
Connectors for electronic equipment - Product requirements - Part
3-104: Detail specification for 8-way, shielded free and fixed connectors
for data transmissions with frequencies up to 1000 MHz
IEC
61076-3-106:2006
Connectors for electronic equipment - Product
requirements - Part 3-106: Rectangular connectors - Detail specification
for protective housings for use with 8-way shielded and unshielded
connectors for industrial environments incorporating the IEC 60603-7
series interface
IEC
61076-2-101:2004 and A.1:2006
Connectors for electronic equipment - Part 2-101: Circular connectors
- Detail specification for circular connectors M8 with screw- or
snap-locking, M12 with screw-locking for low voltage applications
IEC
61169-2:2007
Radio-frequency
connectors - Part 2: Sectional specification - Radio frequency coaxial
connectors of type 9,52
IEC
61169-24:2001
Radio-frequency
connectors - Part 24: Sectional specification - Radio frequency
coaxial connectors with screw coupling, typically for use in 75
ohm cable distribution systems (type F) |
|
EN
60603-7-4:2005
Connectors for electronic equipment - Part
7-4: Detail specification for 8-way, unshielded, free and fixed
connectors, for data transmissions with frequencies up to 250 MHz
EN
60603-7-7:2006
Connectors for electronic equipment - Part
7-5: Detail specification for 8-way, shielded, free and fixed connectors,
for data transmissions with frequencies up to 600 MHz
EN
61076-3-104:2006
Connectors for electronic equipment - Product requirements - Part
3-104: Detail specification for 8-way, shielded free and fixed connectors
for data transmissions with frequencies up to 1000 MHz
EN
61076-3-106:2006
Connectors for electronic equipment - Product
requirements - Part 3-106: Rectangular connectors - Detail specification
for protective housings for use with 8-way shielded and unshielded
connectors for industrial environments incorporating the IEC 60603-7
series interface
EN
61076-2-101:2003 and A.1:2006
Connectors for electronic equipment - Part 2-101: Circular connectors
- Detail specification for circular connectors M8 with screw- or
snap-locking, M12 with screw-locking for low voltage applications
EN
61169-2:2007
Radio-frequency
connectors - Part 2: Sectional specification - Radio frequency coaxial
connectors of type 9,52
EN
61169-24:2001
Radio-frequency
connectors - Part 24: Sectional specification - Radio frequency
coaxial connectors with screw coupling, typically for use in 75
ohm cable distribution systems (type F) |
|
BS
versions of those ENs listed |
IEC
60874-19-1:2007
Fibre optic interconnecting devices and passive
components - Connectors for optical fibres and cables - Part 19-1:
Fibre optic patch cord connector type SC-PC (floating duplex) standard
terminated on multimode fibre type A1a, A1b - Detail specification
IEC 61754-20:2002
Fibre Optic Connector Interfaces - Part 20: Type LC connector family
EN
61754-7:2008
Fibre optic connector interfaces -- Part 7: Type MPO connector family
EN 61755-3-2:2006
Fibre optic connector optical interfaces - Part 3-2: Optical interface,
2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for
8 degrees angled-PC single mode fibres |
|
EN 50377-7-1:2004
Connector sets and interconnect components to be used in optical
fibre communication systems - Product specifications -- Part 7-1:
Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b
multimode fibre
EN 50377-7-2:2004
Connector sets and interconnect components to be used in optical
fibre communication systems - Product specifications -- Part 7-2:
LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode
fibre
EN 50377-7-3:2004
Connector sets and interconnect components to be used in optical
fibre communication systems - Product specifications -- Part 7-3:
Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode
fibre
EN 50377-7-4:2004
Connector sets and interconnect components to be used in optical
fibre communication systems - Product specifications -- Part 7-4:
LC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode
fibre
EN 61754-7:2005
Fibre optic connector interfaces -- Part 7: Type MPO connector family
EN
61754-20:2002
Fibre Optic Connector Interfaces - Part 20: Type LC connector family
|
|
BS
versions of those ENs listed |
IEC
61935-2:2005
Generic cabling systems - Specification for
the testing of balanced communication cabling in accordance with
ISO/IEC 11801 - Part 2: Patch cords and work area cords
|
|
EN
61935-2:2005
Testing of balanced
communication cabling in accordance with standards series EN 50173
- Part 2: Patch cords and
work area cords
EN 60966-2-4:2003
Radio frequency and coaxial cable assemblies.
Detail specification for cable assemblies for radio and TV receivers
Frequency range 0 to 3000 MHz, IEC 61169-2 connectors
EN 60966-2-5:2003
Radio frequency and coaxial cable assemblies.
Detail specification for cable assemblies for radio and TV receivers.
Frequency range 0 to 1000 MHz, IEC 61169-2 connectors
EN 60966-2-6:2003
Detail specification for cable assemblies
for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC
61169-24 connectors
|
|
BS
versions of those ENs listed |
--------------------------- |
|
---------------------------
|
|
--------------------------- |
